Specialized 22' S-Works Stumpjumper EVO Frame

This S-Works Stumpjumper EVO Frame is the perfect canvas to imagine your ultimate ride. Build your totally custom dream bike, make it a reality, and shred happily.

The S-Works Stumpjumper EVO is much more than just a trail bike; it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy.

  • All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.

  • The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
  • Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
  • We introduced the SWAT door on the Stumpjumper in 2016, adding room within your frame for those “oh unluggy uce” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 650 millilitres of water storage – the same size as a small water bottle – hidden in your downtube.

Specification:

Frame

FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel

SWAT

Increased-volume SWAT™ Door integration with 650ml SWAT Bladder

Rear Shock

FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm

Seat Binder

Alloy, 38.6mm

Shock-to-rear triangle linkage

Carbon-fibre linkage (pictured below) exclusive to the S-Works frame and S-Works complete bike

Geometry & Sizing:

S1

S2

S3

S4

S5

S6

BB Drop

40

35

35

35

35

35

BB Height

335

340

340

340

340

340

Bike Standover Height

733

764

763

762

767

770

Chainstay Length

438

438

438

438

448

448

Fork Length (full)

561

571

571

571

571

571

Fork Rake/Offset

44

44

44

44

44

44

Front Center

732

756

780

809

838

873

Headtube Angle

64.5

64.5

64.5

64.5

64.5

64.5

Headtube Length

95

95

105

115

125

135

Max Seatpost Insertion

180

180

200

220

240

260

Min Seatpost Insertion

80

80

80

80

80

80

Reach

408

428

448

475

498

528

Seat Tube Angle

78

77.6

77.2

76.9

77

77

Seat Tube Length

385

385

405

425

445

465

Stack

613

617

626

635

644

654

Top-tube Length (horizontal)

538

564

590

623

647

679

Trail

131

131

131

131

131

131

Wheelbase

1167

1191

1216

1247

1285

1319

*The geometry in the following chart is when using the middle headset cup (steep and slack cups included with bike), chainstay flipchip in High mode and 29" wheels.

Click here to view the geometry in each unique setting.

Detailed below are the 2022 S-Works Stumpjumper Evo frame's sizes, with their respective rider's height ranges to which they suit.

S1 - 150cm to 160cm (4'11" to 5'3")

S2 - 157cm to 173cm (5'2" to 5'8")

S3 - 165cm to 180cm (5'5" to 5'11")

S4 - 173cm to 188cm (5'8" to 6'2")

S5 - 178cm to 193cm (5'10" to 6'4")

S6 - 188cm to 203cm (6'2" to 6'8")

Please note, while you may fit snuggly (according to the size guide) into one particular size, we advise you size DOWN for more manoeuvrability in tight corners or playfulness in flicking the bike in the air. Conversely, size UP for more stability through rough fast rock gardens, aggressive root sections, etc. Our staff will happily engage you in this wider sizing conversation to have you riding the right size bike for your height and riding style.

WHY BUY FROM US?

With over 17 years experience offering quality bikes and service, you can rest assured we have deeply considered the quality of the products we sell and have the technical skills to assist if any possible problems arise.

Along with being the ‘local’ bike store to many riders in Auckland, we also have an extensive customer base of riders nationwide. Believe it or not we even have riders from overseas come to us for our quality products and expertise!

Lastly, we are riders ourselves. We are in this business because we are genuinely passionate about riding all types of bikes and are here to share our knowledge to help enhance your riding experience.

Why buy from us