📸 View our gallery of studio photographs here in the Gloss Smoke and Gloss Red Tint colour schemes.
This is the bike that defines the very genre that bears its name—the S-Works Enduro climbs with utmost efficiency yet stays calm on even the gnarliest descents. It features a bomber, yet lightweight carbon frame that blissfully tackles the kind of terrain that chews up and spits out lesser bikes.
Incredibly capable — If the Enduro looks like its sibling, the Demo, it’s because they share plenty of downhill DNA. A more-rearward axle path reduces wheel hang-up on big impacts. A low- and forward-positioned shock keeps it planted and confident-feeling at high speeds. And balanced chassis stiffness helps the front-end steer precisely and keeps the rear-end tracking like it’s on rails. Add it all up and you have a bike that laughs in the face of the steepest, rockiest trails.
Astonishingly fast — Stomp on the pedals and the new Enduro accelerates far quicker than you'd expect possible from a downhill bruiser. To start, we increased anti-squat, so the suspension better-resists pedal bob. Then, to further its efficiency, we re-directed the angle of the chainstay and upper shock linkages for a much more efficient design. The end result? Less bobbing, more speed.
Fast starts with fit — Fast and fit aren't mutually exclusive, which is why the progressive geometry of the Enduro has been designed for going up and down. To start, seat tubes and stack heights don’t grow massively between sizes, meaning you can now pick a frame size based on both your height and your riding style. Pair this new sizing style with a slacker head angle, longer reach, and steeper seat tube across the line, and you’re left with a quicker and more capable steed, no matter the size.
Specifications:
Frame |
FACT 11m carbon chassis and rear-end, S-Sizing Enduro Race Geometry, SWAT Door integration, threaded BB, internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 170mm of travel |
Rear Shock |
Fox Float X2 Factory, Rx Trail Tune, 2-position adjustment, high and low speed rebound and compression adjust, Trunnion mount, 205x60mm |
Seat Post Collar |
Alloy, 38.6mm, hex-bolt type |
Geometry & Sizing:
Please note, the Enduro features a flip-chip in the lower shock that allows you to alter the geometry. High mode slightly steepens the head angle 0.4° and raises the bottom bracket height by 7mm. This adjustability is accounted for and represented in the geometry chart below.
S2 |
S3 |
S4 |
S5 |
|
B-B Drop |
21 |
21 |
21 |
21 |
B-B Drop (low BB) |
28 |
28 |
28 |
28 |
B-B Height |
354 |
354 |
354 |
354 |
B-B Height (low BB) |
347 |
347 |
347 |
347 |
Chain-Stay Length |
442 |
442 |
442 |
442 |
Crank Length |
170 |
170 |
170 |
170 |
Fork Length (full) |
581 |
581 |
581 |
581 |
Fork Rake/Offset |
46 |
46 |
46 |
46 |
Front-Center (low BB) |
777 |
806 |
833 |
862 |
Handlebar Width |
800 |
800 |
800 |
800 |
Head-Tube Angle |
64.3° |
64.3° |
64.3° |
64.3° |
Head-Tube Angle (low BB) |
63.9° |
63.9° |
63.9° |
63.9° |
Head-Tube Length |
95 |
100 |
110 |
120 |
Reach (low BB) |
437 |
464 |
487 |
511 |
Saddle Width |
155 |
143 |
143 |
143 |
Seat-Tube Angle |
76° |
76° |
76° |
76° |
Seat-Tube Length |
400 |
420 |
440 |
465 |
Seatpost Length |
150 |
180 |
180 |
210 |
Stack (low BB) |
616 |
620 |
629 |
638 |
Stem Length |
40 |
50 |
50 |
50 |
Top Tube Length (Horizontal) |
591 |
619 |
644 |
670 |
Trail (low BB) |
132 |
132 |
132 |
132 |
Wheelbase |
1217 |
1246 |
1274 |
1302 |
*Barring angle values marked by their degree symbol (°), all chart measurements above are listed in millimetres (mm).
Traditional sizing:
Ascend through the sizes and you'll see the seat tubes, head tubes and standover swell considerably. Dropper posts typically couldn't boast longer travel due to the frame restrictions.
Style-specific (S) sizing:
Seat tube lengths, standover height and head tube lengths vary less between sizes. Riders can now size up and yet fit a longer dropper post at their will.
Detailed below are the 2022 S-Works Enduro Frameset's sizes, with their respective rider's height ranges to which they suit.
S2 - 157cm to 173cm (5'2" to 5'8")
S3 - 165cm to 180cm (5'5" to 5'11")
S4 - 173cm to 188cm (5'8" to 6'2")
S5 - 178cm to 193cm (5'10" to 6'4")
Please note, while you may fit snuggly (according to the size guide) into one particular size, we advise you size DOWN for more manoeuvrability in tight corners or playfulness in flicking the bike in the air. Conversely, size UP for more stability through rough fast rock gardens, aggressive root sections, etc. Our staff will happily engage you in this wider sizing conversation to have you riding the right size bike for your height and riding style.
With over 17 years experience offering quality bikes and service, you can rest assured we have deeply considered the quality of the products we sell and have the technical skills to assist if any possible problems arise.
Along with being the ‘local’ bike store to many riders in Auckland, we also have an extensive customer base of riders nationwide. Believe it or not we even have riders from overseas come to us for our quality products and expertise!
Lastly, we are riders ourselves. We are in this business because we are genuinely passionate about riding all types of bikes and are here to share our knowledge to help enhance your riding experience.